Description

The EWP80 greatly enhances engine cooling control while givingyou added power and improved fuel economy.By removing the parasitic power losses of a belt-driven, mechanicalwater pump the EWP can provide up to 10kW (13hp) of extra powerand increased torque. Use for Engines up to 2.0L standard.

The included LCD Fan Digital Controller will manage both the EWPand Thermatic fan operation. The Digital Controller will vary thespeed of the EWP in response to the engines coolant temperature.Multiple temperature settings are provided on the Controller foreither maximum power or fuel efficiency.

The Thermatic Fan/s will be activated automatically oncethe engine coolant rises 3C (5.4F) above the targeted (set)temperature. The Digital Controller will automatically run on for threeminutes (or to 10C / 14F below the set temperature) after engineshut down, eliminating heat soak and extending engine life.

Technical Specifications- EWP80

• Operating voltage 3V DC to 15V DC
• Maximum current 7.5A @ 13V
• Flow rate (max) 80 L/min @ 13V DC
• Operating temp. -40 to 130C (-40 to 266F)
• Pump weight 900 grams (2.0 lb)
• Pump material Nylon 66, 30% glass-filled
• Burst pressure 350 kPa (50 psi)
• Seal Ceramic face seal
• Fits hose sizes 32mm to 51mm (1 to 2)
• Elbow Adaptor 35mm (Nylon) 1
• Straight Adaptor 35mm (Nylon) 1

Technical Specification – LCD Controller

• Voltage range 12V DC to 29V DC
• Display LCD size 64.6mm x 55.6mm
• Maximum current 12Amps

Warning alarm has High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit.

Overrun/ shutdown -10C (14F) below set/target temperature or 3 minutes

Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)