Description

The EWP115 (115 litres per minute) pump is suitable for small,medium, large, high- performance and 4WD vehicles. Its aperformance product that improves engine cooling control andcapacity whilst giving you more power and torque and improved fueleconomy.

Practical alternative to the mechanicalbelt-driven pump or fitted as an auxiliary pump.Mechanical belt-driven water pumps run directly off the motor andsap engine power the DC-8025 is hardwired into your electricalsystem, by-passing the engine and releasing up to an additional10kw (13hp).

Benefits to a Davies Craig EWP over an existing mechanical pump:

• Coolant is circulated after engine shutdown preventing hotspots
• Increased engine power and torque
• Better control of engine temperature
• Increased cooling capacity
• Improved fuel economy
• Increased engine life
• Radiator size and coolant capacity can be reduced saving weight
• Increase in maximum engine speed
• Suits Engines up to 2.0L- 3.5L

Davies Craig electic Water pump can be fitted by them selfs, though to obtain full benefits it is recommended that its used with a digital controller which gives you full control over the engine running temperature, though can simply be wired into an after market ecu such as a Haltech, LINK G4 etc to control the water pump!

Dimensions:
Height 84 mm, Width 128 mm, Inlet Opening 38 mm

Components:

• 8125 EWP115 12V Pump x1
• Adapter Sleeves 3mm x 2
• Wiring Harness x 1
• Hardware Bag x 1
• Hose Clamps x 2
• Instruction Sheet x 1

Specifications:

• OPERATING VOLTAGE 3V DC to 15V DC
• MAXIMUM CURRENT 10A @ 13V
• MAX FLOWRATE 115 L/min, (30.38gal / min) at 13V DC
• OPERATING TEMP -40C to 130C (-4F to 284F)
• PUMP DESIGN Clockwise Centrifugal
• PUMP WEIGHT 920 grams (2.03lb)
• PUMP MATERIAL Nylon 66, 30% glass filled
• BURST PRESSURE 500 kPa (72.5 psi)
• FITS HOSE SIZES 32mm to 51mm (using included Adapter Sleeves).