Description

NEW redesigned Chase BaysPSKit for Nissan 240sx / Silvia S13, S14, or S15is designed to eliminate the common factory power steering leaks, fluid spillover,& overheating issues w/improved aesthetics, durability,& stealthy design. It is a full 100% upgraded A.N. fitting replacement of the stock reservoir& hoses. From the reservoir to pump to rack.

Our over-engineered Triple-Baffled Power Steering Reservoir (aeration& spillover proof) is at the core of this kit. It optionally comes withupgraded SetrabOil Cooler that mounts under the driver side headlight (or in center) for additional airflow. Chase Bays only uses highest quality components available. Our reservoir is constructed of 6061 aluminum7 is anodized black w/laser etched cap. The reservoir itself uses ourown aluminum bracket& 7 can be mounted in the stock location.

TripleBaffled Power Steering Reservoir
Countless hours of research& development were put into our newest Power Steering Reservoir. This isnt as simple as putting 2 fittings on a fluid container& calling it a day. It’s far more complex. The smaller fitting on Reservoir is fluid return from rack. It can be sent back at pressures up to 120psi. When that hits the fluid in reservoir it can cause extreme foaming aeration if not properly slowed down& directed. The more the steering& RPM on the car, higher the pressures will be. This is what commonly causes spillover through caps under heavy use. Most people think their fluid is boiling over when this happens but in most cases it’s not

We’ve put serious engineering time into internal design to negate this aeration& spillover entirely. Performance of this Power Steering Reservoir has rave reviews from our customers. In reservoir photos you can see a “chimney” inside, there’s a multi-layer design within this chimney. We can’t give away all our secrets, but just know you won’t have any aeration or spillover issues. Between on track testing& computer fluid dynamics, we’re able to slow down 120psi to 12psi in 2″ of fluid motion. Thats just2 baffles, it doesnt end there.

Power Steering is a loop hydraulic system so it needs to be vented. The cap has a unique baffle design to block fluid from pushing out the vent. Go to any road race/drift/rally event& look at all factory& aftermarketPSreservoirs. By end of the day there’s spillover all around reservoir. It was our goal to be 1 in 100 reservoirs to have no spillover. We’re proud to say;that goals met.

COLD FILL POINT:Halfway filled up on reservoir.

Reservoir Mounting
Our clever reservoir mounting brackets makes a few adjustments from stock. The bracket itself works for S13, S14 & S15 chassis unlike stock piece. On S13 the bolt holes used are slightly further back on shock tower (like S14& S15) but positioning is nearly the same. We pushed reservoir toward engine1″to allow room for wheel tubs.

If you have top mount setupthen it may collidew/ reservoir. On our mockup chassis we have top mount GT2871R SR20DET& it still clears. Use ourInstall photos as reference.If you need more clearance in that area we make a kit that mounts reservoir on core supporthttps://www.chasebays.com/products/chase-bays-power-steering-kit-nissan-240sx-s13-s14-s15-with-rb20det-rb25det-rb26dett-core-support-mounting

Hoses& Adapters

High-pressure rack to pump hose is -6AN stainless steel, Teflon PTFE lined, black PVC coated. This coating is crucial, it makes hose resistant to chaffing if it routes against metal or fellow hose, -6AN rack to reservoir -10AN reservoir to pump hoses are abrasion resistant, black nylon sheathed, stainless steelreinforced. They are all completedw/ high end black aluminum AN fittings Metric to AN adapters for rack pump conversion to AN.

We upgrade factory rack connections. They use inner o-ring seal instead of sealing washer or flare seal, so hex will not visibly seat all the way. This is okay as seal happens on bottom of fitting. S chassis racks have deep threads so we make our own custom length adapters& use an o-ring twice thickness from stock one. Rest easy as you’ll get to enjoy a leak free power steering setup for years to come.

SetrabFluidCooler
Our optional cooler add-on features a black Setrab10 Row Oil Cooler (11.25″ x 3″ x 2″)all aluminum black coatedfor durablestealthy finish. Very compact & effective. Weve seen 20F drops inTemp
Applications

DOESN’T WORK W’HICAS PUMPS W/OMODS. Most customers switch to KA pumps or non-Hicas RB pumps viahttp://nicoclub.com/archives/how-to-ka-power-steering-pump-on-rb25.html

89-94 S13 Nissan 240sxw/ RB20DET, RB25DET, RB26DETT
95-98S14 Nissan 240sxw/RB20DET, RB25DET, RB26DETT
89-02 S13, S14, orS15 RHDSilvia or 180sxwithRB20DET, RB25DET, RB26DETT

March 2018 Revisions:

We’ve developed a bracket that works for S13& S14/S15 chassis to mount] reservoir in stock location.
We provide proper inner o-ring seal rack fittings