Description

4.5 of pure carbon power. Presenting the S-FLO Carbon Intake Suite for the Audi 8V RS 3 and Mk3 TT RS:

• The largest constant diameter intake system available for the Audi 8V RS 3 and Mk3 TT RS on the planet
• Colossal 4.5″ carbon intake tube
• 30% increase in filter surface area over stock
• Designed, engineered, and tested in-house at AWE
• Max gains of 7 hp and 3 ft-lbs of torque at the wheels (S-FLO Open Carbon Intake System, stage 1+ software)
• Max gains of 17 hp and 7 ft-lbs of torque at the wheels (S-FLO Closed Carbon Intake System, stage 1+ software)
• Increase in overall airbox volume
• Completely modular design allows multiple configuration options and an upgrade path
• Available as S-FLO Carbon Inlet Tube, S-FLO Shortie Carbon Intake (open element), S-FLO Open Carbon Intake System (open element), and S-FLO Closed Carbon Intake System
• Intoxicating turbo spool and diverter valve sounds
• S-FLO Closed Carbon Intake System optimized to capture significant amount of ram air over stock, and allows entire air filter to be utilized
• Bespoke CNC laser-cut stainless support bracket included
• Features the washable and oil-less high-flow S-FLO Filter
• Perfect integration with OEM inlet ducting
• Retains stock mounting locations for OE fit
• DV Adapter Kit for 2019+ models available separately
• Genuine 2×2 carbon fiber construction
• UV-stabilized resin and clear coat
• Perfect fitment, guaranteed
• AWE No Check Engine Light Guarantee

The Options

S-FLO Carbon Inlet Tube:

The S-FLO Carbon Inlet Tube is the largest amongst its peers, with impressive adaptability to facilitate maximum gains. The colossal 4.5 S-FLO Carbon Inlet tube bridges the gap between the turbo inlet pipe and the factory airbox seamlessly.

The S-FLO Carbon Inlet Tube is for drivers looking to extract the most out of their factory airbox while increasing throttle response.

S-FLO Shortie Carbon Intake:

The S-FLO Shortie Carbon Intakes replaces the factory airbox with a massive S-FLO Filter with frontal opening toting a 30% increase in filter surface area, and a 4.5 carbon elbow. All firmly planted via a bespoke CNC laser-cut stainless support bracket.

The S-FLO Shortie Carbon Intake is the perfect configuration for drivers looking to uncork beloved turbo noises out of their RS 3.

S-FLO Open Carbon Intake System:

Combine the S-FLO Carbon Inlet Tube with the Shortie Carbon Intake, and you have the impressive (and very vocal) S-FLO Open Carbon Intake System.

A full 4.5 diameter configuration from S-FLO Filter to turbo inlet coupler, this version delivers an increase of 7 hp and 3 ft-lbs of torque at the wheels with an ample dose of turbo induction and diverter valve sounds with each rip of boost.

S-FLO Closed Carbon Intake System:

The S-FLO Closed Carbon Intake System combines each component of the S-FLO suite and adds a bespoke carbon air box. Spanning the entire width of the grille, the S-FLO Closed Carbon Intake is capable of collecting all of the ram air from the front of the vehicle to feed it into the S-FLO Filter.

Thanks to the 2×2 carbon fiber construction, heat soak is subdued during hard driving while the increase in air box volume ensures the 2.5T never runs scarce of cold air.

The S-FLO Closed Carbon Intake System unlocks 17 hp and 6 ft-lbs of torque at the wheels, and is capable of handling any higher-than-stock boost level thrown at it.

Upgrade path:

The S-FLO Carbon Intake Suite is modular by design allowing an easy evolution from the S-FLO Inlet Tube or S-FLO Shortie Carbon Intake to the full S-FLO Carbon Intake Systems (open or closed).

Go all-in with the S-FLO Closed Carbon Intake System, or tackle it in phases. Your call.

S-FLO 4 Coupler:

The S-FLO Carbon Inlet Tube, Shortie Carbon Intake, and Open/Closed S-FLO Carbon Intake Systems come complete with a 4.5 to 3 couplers to mate to the factory 3 turbo inlet pipe. The S-FLO 4 Coupler transitions from 4.5 to 4 to accommodate aftermarket turbo inlet pipes that are 4 in diameter.

DV Adapter Kit:

The DV Adapter Kit is a an adapter machined in-house out of billet 6061 aluminum for 2019+ models. The kit includes the DV adapter, two oil resistant o-rings, two worm-drive clamps, and 8.75″ of high temp silicone hose.

Important Notes:

• 2019+ models require the additional DV Adapter Kit
• The AWE 4.5″ S-FLO Carbon Intake Suite is for racing use only