Description

The EBP23 is a brushless 12 volt, high flow (23 litres / 6.08 gallons per minute), magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. The many EBP applications include: booster for car heater and LPG systems, solar pump applications, water cooled motorcycle, go-kart engines, turbo air / water intercoolers & household irrigation.

The EBP23 is designed to complement your existing Davies, Craig EWP (Electric Water Pump), or belt-driven mechanical water pump, or improve your heater and/or cooling system or assist engine block cooling circulation. The EBP can continually circulate coolant around the engine head, block and by-pass. It has a high flow capacity and has the advantage of running at a speed independent of the engine speed. The EBP can also be set to continue running with a timer or thermal switch (not supplied) after engine shut down to prevent damaging heat soak.

Technical Specifications
Motor 12V Brushless
Operating Voltage 9V to 15V DC
Max Current Draw 1.1 Amps
Pump Design Recirculating * Centrifugal
Drive Magnetic No seals
Operating Temperature -40C to +120C
Burst Pressure 250Kpa (36PSI)
Flow Rate 23 L/min (6 gal/min)
Head Pumping Pressure 0.25 Bar 3.62 PSI
Self Priming No
Weight 364g (0.8 lbs)
Max Head 2.2M